Created packaging files for each game for the new packaging system

2048/.package

@@ -0,0 +1,5 @@
+N;2048
+F;2048.COM
+S;2048.ASM
+R;README.md
+D;2048 game for CP/M + VT100/ANSI color

Backgammon/.package

@@ -0,0 +1,8 @@
+N;BACKGMMN
+F;backgmmn.com
+S;backgmmn.c
+S;gameplan.c
+S;gameplan.hdr
+S;mylib2.c
+R;README.md
+D;Backgammon game for CP/M + VT100/ANSI color

Battleships/.package

@@ -0,0 +1,7 @@
+N;BATTLSHP
+F;bs.com
+S;bs.c
+S;esr.txt
+R;README.md;BS.DOC
+S;readme.txt
+D;Battleships for CP/M + VT100

Blocks/.package

@@ -0,0 +1,7 @@
+N;BLOCKS
+F;BLOCKS.COM
+S;blocks.c
+S;kslibfun.h
+S;kslib.h
+R;README.md
+D;Blocks, a SameGame clone for CP/M + VT100/ANSI(color)

CatChum/.package

@@ -0,0 +1,6 @@
+N;CATCHUM
+F;CATCHUM.COM
+F;CATCHUM.DAT
+F;CATCONF.COM
+R;README.md
+D;CatChum - a PacMan Clone for CP/M

FindThatMine/.package

@@ -0,0 +1,8 @@
+N;FTM
+S;ftm.c
+F;ftm.com
+S;gpl-3.0.txt;GPL3.TXT
+S;ks.h
+R;README.md
+D;FindThatMine, a Minesweeper clone for CP/M
+D;VT100/ANSI color version

FindThatMine/README.md

@@ -1,6 +1,6 @@
 # Find That Mine!
 
-A MineSweeper clon game for CP/M
+A MineSweeper clone game for CP/M
 
 VT100 color version by Anna Christina Naß <acn@acn.wtf>
 

Ladder/.package

@@ -0,0 +1,7 @@
+N;LADDER
+F;LADCONF.COM
+F;LADDER.COM
+F;LADDER.DAT
+R;README.md
+D;Ladder - a jump and run game for CP/M
+D;(configured for VT100)

LadderTP/.package

@@ -0,0 +1,18 @@
+N;TPLADDER
+F;LADCONF.COM
+F;LADDER.COM
+F;LADDER.DAT
+S;LADACTOR.PAS
+S;LADCONST.PAS
+S;LADDER.PAS
+S;LADFIELD.PAS
+S;LADICONS.PAS
+S;LADMAIN.PAS
+S;LADPROCS.PAS
+S;LADTYPE.PAS
+S;LADUTILS.PAS
+S;LADVAR.PAS
+R;README.md
+D;Ladder (TP version) - jump and run game for CP/M
+D;Recreation of Ladder in Turbo Pascal
+D;configured for VT100 terminal

MazezaM/.package

@@ -0,0 +1,7 @@
+N;MAZEZAM
+S;Makefile
+S;mazezam.c
+F;mazezam.com
+R;README.md
+D;MazezaM - a puzzle game for CP/M
+D;for VT100/ANSI color terminals - 42 levels!

Pac/.package

@@ -0,0 +1,10 @@
+N;PAC
+S;ansi.c
+S;ansi.h
+S;LICENSE
+S;Makefile
+S;pac.c
+F;pac.com
+R;README.md
+D;Pac - a PacMan clone for CP/M
+D;for VT100/ANSI color terminals

Quatris/.package

@@ -0,0 +1,11 @@
+N;QUATRIS
+F;QUATRIS.COM
+F;QUATRIS.SCO
+F;PDTINS.COM
+F;PDTINS.DTA
+S;QUATRIS.ASC
+S;QUATRIS.FOR
+S;QUATRIS.TXT
+R;README.md
+D;Quatris - a Tetris game for CP/M
+D;configured for VT100 terminals

RobotChase/.package

@@ -0,0 +1,10 @@
+N;CHASE
+F;chase.com
+S;ansi.c
+S;ansi.h
+S;chase.c
+S;LICENSE
+S;Makefile
+R;README.md
+D;Robot Chase for CP/M Z80 Systems
+D;Configured for VT100/ANSI color terminals

Robots/.package

@@ -0,0 +1,8 @@
+N;ROBOTS
+F;ROBOTS.COM
+F;robots.txt
+S;robots.c
+S;copying.txt
+R;README.md
+D;Robots - a turn based CP/M game to escape killer robots
+D;for VT100 terminals

Rogue/.package

@@ -0,0 +1,7 @@
+N;ROGUE
+F;rogue.com
+F;ROGUE.DOC
+S;ROGUE.NOT
+S;QTERM.PAT
+D;Rogue - CP/M port of the classic game
+D;for VT100 terminals

Rogue/QTERM.PAT

@@ -0,0 +1,196 @@
+Patching QTERM for your system.
+
+The first thing to do is to back QTERM up, and then invoke DDT, SID, ZSID,
+or whatever your local patch utility is, in the following way:
+
+A>DDT QTERM.COM
+
+DDT (etc.) will read in QTERM, and then prompt. The following is a list of
+patch areas where QTERM should be changed to reflect your system. Some of
+these are mandatory (i.e. QTERM won't work without them), whereas others
+can be changed to null subroutines or empty data without preventing QTERM
+from working, it just won't have all the features available.
+
+
+1. Modem input status: 0110 - 011F
+
+QTERM calls here to check RDR: status. Return with the zero flag set if
+no character is available, or with the zero flag clear if a char is
+available. Generally this can be an input from the usart / sio / dart
+status port followed by an 'and'.
+
+2. Read modem character: 0120 - 012F
+
+This gets a character from the RDR: port once the input status has decided
+it's there. Return the character in the a register. Generally this can be
+an input from the usart / sio / dart data port.
+
+3. Modem output status: 0130 - 013F
+
+Check if the PUN: port can accept another character. Return with the zero
+flag set if the PUN: port can't receive a character, or with the zero flag
+clear if the PUN: port is ready. Generally this can be an input from the
+usart / sio / dart status port followed by an 'and'.
+
+4. Write modem character: 0140 - 014F
+
+Send the character in the a register to the PUN: port. This will only be
+called after the output status routine has returned a non-zero status.
+Generally this can be an output to the usart / sio / dart data port.
+
+These first four patches are all necessary for QTERM to work. The next few
+are not necessary, but they will be useful.
+
+5. Start break: 0150 - 015F
+   End break: 0160 - 016F
+
+The start break subroutine at 0150 should initiate a break condition on
+the modem output line, and 0160 should clear the break condition. If these
+are to be omitted, then just put return (C9) instructions at 0150 and 0160.
+
+6. Drop DTR: 0170 - 017F
+   Restore DTR: 0180 - 018F
+
+The drop DTR subroutine causes DTR to be made inactive, and restore DTR
+returns DTR to an active state. If these are to be omitted, then just put
+return (C9) instructions at 0170 and 0180.
+
+7. Baud rate setting: 0190 - 019F
+   Baud rate table: 01A0 - 01AF
+
+These two patch areas work together to allow QTERM to change the baud rate
+of the modem port. The baud rate table holds pairs of bytes for setting the
+baud rate to eight different values: 38400, 19200, 9600, 4800, 2400, 1200,
+600 and 300, in that order. In these pairs, the first byte will be passed
+to the subroutine at 0190, and the second byte is used to enable that baud
+rate: an 0FFH in the second byte enables the rate, and a zero disables.
+So if your system only went up to 9600, (using a value of 1 to get 9600)
+the first six bytes in the table would be:
+
+	00 00		no value for 38400: disable by the 00
+	00 00		no value for 19200: disable by the 00
+	01 FF		01 is the value for 9600: enable by the FF
+
+In all cases of enabled baud rates, the subroutine at 0190 gets the
+appropriate value in the a register and should use it to set the baud rate.
+If this is to be omitted, then just put a return (C9) instruction at 0190,
+and fill the table from 01A0 to 01AF with 00's.
+
+8. Communication mode setting: 01B0 - 01BF
+   Communication mode table: 01C0 - 01CB
+
+These two patch areas work together to allow QTERM to change the
+communications format of the modem port. The mode table holds bytes for
+setting 12 different formats, selecting number of data bits (7 or 8)
+parity (odd, even, or none) and number of stop bits (1 or 2). In order
+the 12 values are for 7n1, 8n1, 7n2, 8n2, 7e1, 8e1, 7e2, 8e2, 7o1, 8o1,
+7o2, and 8o2. The subroutine at 01A0 gets one of these values in the a
+register and should use it to set the communications mode. If this is to
+be omitted, then just put a return (C9) instruction at 01A0.
+
+9. Processor speed: 01CE
+
+This is the speed in Mhz that your Z80 runs at: 4, 6 or whatever. For
+a 2.5Mhz cpu, use 2.
+
+10. Escape character: 01CF
+
+All special functions of QTERM are activated by the use of escape sequences.
+At 01CF is the byte used for the escape character (the default is ^\). Any
+byte can be used, but a little used value is best selected, also using a
+printable character (' ' thru '~') may have undesirable results. Note that to
+transmit the escape value itself, just type it twice.
+
+These previous two are necessary.
+
+11. Signon message: 01D0 - 01EF
+
+This must be a string that identifies your system / terminal. It must be
+present, and is printed when QTERM first starts. As with the previous
+strings it must be terminated by a zero byte.
+
+12. Clear screen: 01F0 - 01FF
+
+This must be a string that clears the terminal screen, and leaves the
+cursor in the top left hand corner.
+
+13. Moveto: 0200 - 022E
+
+QTERM requires the ability to move the cursor around the screen. It calls
+this subroutine with the required coordinates in hl: where h is the row,
+and l the column to move to. The top left hand corner of the screen is 0,0;
+and the bottom right corner is 23,79. This subroutine will have to do
+terminal output: at 0109H is a routine that prints a character in the c
+register, and at 010CH is a routine to print a decimal number in hl (mainly
+for the use of vt100 and vt220 compatibles). Note that the above two
+subroutines will destroy all registers, and that this subroutine can also
+destroy all registers.
+
+14. Teminal capability bit map: 022F
+
+This byte contains one bit set for each of the following terminal
+capabilities:
+
+bit 0: (01H)	bright (end highlight)
+bit 1: (02H)	dim (start highlight)
+bit 2: (04H)	delete line
+bit 3: (08H)	insert line
+bit 4: (10H)	delete character
+bit 5: (20H)	insert character
+bit 6: (40H)	clear to end of line
+bit 7: (80H)	clear to end of screen
+
+15. Terminal capability strings: 0230H - 026FH
+
+In this area are eight strings, each of which can be at most eight characters
+long. They are the strings to be printed to perform the terminal capabilities
+mentioned above. Each one of them should be terminated by a zero byte. Hence
+at 0230H is the string for dim (start highlight), at 0238H is the string for
+bright (end highlight), etc.; with 0268H being the string for clear to end of
+screen. Programs that use these will check the terminal capability bitmap at
+022FH before using them, to determine if they are available.
+
+16. Patch area: 0270H - 02FFH
+
+Since the area provided for the above patches is limited, it may be necessary
+to use more space. The block of memory from 0270H to 02FFH is set aside for
+custom patches, this can be used if the individual spaces are not big enough.
+
+
+Once all the patches have been made, exit the patch program (usually by
+typing ^C), and finish up by saving a new copy of QTERM:
+
+A>SAVE 45 QTERMNEW.COM
+
+In addition, the patch area only can be saved as follows:
+
+A>SAVE 2 QTERMPAT.XXX
+
+Which will create a 1/2K file containing all the patches needed to make this
+particular version of QTERM work. By doing this, when a new release of QTERM
+needs to be patched, all that is necessary is to read in the new unpatched
+version with DDT or whatever, then overlay the patch area. This is typically
+done by typing:
+
+IQTERMPAT.XXX
+
+to DDT, SID, ZSID etc. to set up the command line to read QTERMPAT.XXX, then
+follow this with a:
+
+R
+
+to read it. This should overlay the saved patch area on the new version,
+hence doing all the patches at once. Then exit DDT with ^C, and do the
+first save shown above to save the new working version.
+
+
+NOTE: this "overlaying" of patches will NOT work with versions 2.8 and
+earlier, however from 3.0 onwards the patch area is guaranteed not to
+change. To aid in patching from earlier versions, the main changes are:
+1. modification of the baud rate table (expansion from the 4 byte table
+   with 300 1200 2400 & 9600 only) to the 16 byte table that covers up
+   to 38400, with selective rate enable;
+2. moving the processor speed and escape values;
+3. addition of the terminal capability patch area;
+4. addition of the patch area at 0270 to 02FF;
+

Rogue/ROGUE.NOT

@@ -0,0 +1,23 @@
+ROGUE was written Nov 1984 thru Feb 1985 by David Goodenough.
+
+E-mail addresses:
+
+UUCP:		.....!harvard!xait!lakart!pallio!dg
+Internet:	dg%pallio.uucp@cfisun.cfi.com
+GEnie:		D.GOODENOUGH
+Q-Link:		Delta G
+
+I'm also reachable on the following bbs's -
+
+(617) 825-3135
+(617) 288-6477
+(617) 329-4237
+(617) 329-8528
+(617) 965-7259
+
+Where I am always known as DAVID GOODENOUGH
+
+ROGUE.DOC explains how to run ROGUE, and QTERM.PAT explains how to patch
+it for non-Televideo compatible screens. See note at the end of ROGUE.DOC
+for a list of terminals that ROGUE is known to run on.
+

Snake/.package

@@ -0,0 +1,7 @@
+N;SNAKE
+F;SNAKE.COM
+S;COPYING
+S;SNAKE.PAS
+R;README.md
+D;Snake - a snake game for CP/M
+D;for VT100/ANSI color terminals

Sokoban/.package

@@ -0,0 +1,12 @@
+N;SOKOBAN
+F;sokoban.com
+F;soklevls.dat
+F;sokoban.hlp
+S;readme.1st
+S;readme.lnx
+S;readme.org
+S;readme.v2
+S;sokoban.c
+R;README.md
+D;Sokoban - a CP/M version of the classic game
+D;for VT100 terminals

Wanderer/.package

@@ -0,0 +1,72 @@
+N;WANDERER
+S;credits
+S;qterm.pat
+S;-read.me
+S;-readme.1st
+F;screen.001
+F;screen.002
+F;screen.003
+F;screen.004
+F;screen.005
+F;screen.006
+F;screen.007
+F;screen.008
+F;screen.009
+F;screen.010
+F;screen.011
+F;screen.012
+F;screen.013
+F;screen.014
+F;screen.015
+F;screen.016
+F;screen.017
+F;screen.018
+F;screen.019
+F;screen.020
+F;screen.021
+F;screen.022
+F;screen.023
+F;screen.024
+F;screen.025
+F;screen.026
+F;screen.027
+F;screen.028
+F;screen.029
+F;screen.030
+F;screen.031
+F;screen.032
+F;screen.033
+F;screen.034
+F;screen.035
+F;screen.036
+F;screen.037
+F;screen.038
+F;screen.039
+F;screen.040
+F;screen.041
+F;screen.042
+F;screen.043
+F;screen.044
+F;screen.045
+F;screen.046
+F;screen.047
+F;screen.048
+F;screen.049
+F;screen.050
+F;screen.051
+F;screen.052
+F;screen.053
+F;screen.054
+F;screen.055
+F;screen.056
+F;screen.057
+F;screen.058
+F;screen.059
+F;screen.060
+F;screen.061
+F;wanderer.com
+F;wanderer.doc
+D;Wanderer - a CP/M strategy game
+D;collect diamonds and exit the level
+D;contains 61 levels!
+D;Configured for VT100 terminals

Worm/.package

@@ -0,0 +1,4 @@
+N;WORM
+F;worm.com
+R;README.md
+D;Worm - a snake game for CP/M (VT100)

cpmtris/.package

@@ -0,0 +1,10 @@
+N;CPMTRIS
+F;cpmtris.com
+S;conio.z
+S;cpmtris.z
+S;Makefile
+S;rand.z
+S;README.org
+R;README.md
+D;cpmtris - A Tetris clone for Z80-based CP/M machines
+D;configured for VT100 terminals

cpmtris/README.md

@@ -9,7 +9,7 @@ I modified cpmtris so that "vt100" and "8 MHz" are the default values.
 
 ``cpmtris.com`` is the assembled binary that uses these settings.
 
-See README.orig for full documentation.
+See README.org for full documentation.
 
 ## Commands